Group 1 - MAKE - Claudio
From Hackteria Wiki
MAKE - Claudio
Making our own printed circuit board
The first step was to get the circute from the foile with UV light onto the print. (60 seconds under the “nail-studio” UV light)
- File:2015-04-25 13.26.36.jpg
The second step was to remove the unnecessary copper. This was done with different acids. File:2015-04-25 13.26.27.jpg
After that the circuit was soldered. (Components: microcontroller, capacity, LED, speaker) File:2015-04-25 13.24.55.jpg
