Elute the released products

From Hackteria Wiki
Revision as of 14:10, 15 June 2009 by Sem2490 (talk | contribs) (Created page with ''''The Procedure''' #Remove the DNA fragments from the agarose gel with a clean scalpel. Try to get as small a piece of gel as possible, without touching the DNA. #Weigh the gel...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Procedure

  1. Remove the DNA fragments from the agarose gel with a clean scalpel. Try to get as small a piece of gel as possible, without touching the DNA.
  2. Weigh the gel slice in a clorless tube. Add 3 times the volume of Buffer QG to 1 volume of gel.
  3. Incubate at 50°C for 10 minutes, or until all the gel has dissolved. Mix the tube using the vortex mixer every 2 or 3 minutes to make sure it dissolves.
  4. Check if the mixture is yellow in color. If it is, it means that its pH is around 7.5. This is the pH at which the adsorbtion (stickiness)of the QIAquick membrane is most efficient. If it is orange or violet, it is too acidic.