Difference between revisions of "Do eat your laser Tofu (DEYLT)"

From Hackteria Wiki
Jump to: navigation, search
(Ingredient List)
(Pressing)
Line 80: Line 80:
 
Save the crushed soy (okara)
 
Save the crushed soy (okara)
 
[[File:tof_okara.jpg|none|400px|]]
 
[[File:tof_okara.jpg|none|400px|]]
 +
<br>
  
 
=== Nigari ===
 
=== Nigari ===

Revision as of 18:20, 22 August 2012

The Do-It-Yourself (DIY) and Do-It-With-Others (DIWO) approaches in citizen science projects are embodied in the preparing of food, which could serve as a model for public participation in science initiatives. Working in a kitchen has many paralles with working in a scientific bio lab. And even fundamental process like fermentation, encapsulation and coagolation are used and can be explored. So let's make some tofu and revive the artisans’ experiments, which always involved not only observations, but also tasting...

To prepare tofu we need a nice tofu press. So first we make a open source, laser cut tofu press. Then we go on to the kitchen.

FABLAB tofu press making


Tof tofu press.jpg

Tofu press made from a single board of wood (about 40 cm x 40 cm) and assembled like a pizzle without screwing.

Design sketches

Tof sketch.jpg

The idea is that there are holes to remove the water, height to support enough of the liquid to press down to a nice thick tofu layer, a lid to press the tofu, and an easy disassembly to recover the tofu intact.

Laser cutting

Tof cutting.jpg

Traditionally, in Japan, cypress is used – we used a 6mm composite board. We share the design as a pdf.

Assemblage of Prototypes

Tof assemblage.jpg

When you scale up the illustrator, remember the thickness changes too!!
We tried plexiglass and it is beautiful.

Tof plexi.jpg



Tofu-making

Concept

Conceptually, it is protein coagulation – with much similarity to fresh cheese making.
http://en.wikipedia.org/wiki/Coagulation_(disambiguation)
http://www.uacg.bg/filebank/att_1846.pdf


Ingredient List

600g dry soybeans (Asian store)
4 liters of water
2 tablespoons of Nigari = coagulant, MgCl2 (Health food stores)


The MgCl2 gives a slow coagulation and finally a smoother texture (traditional coagulant in Japan)
Alternatives:
CaCl2--> gives a fast coagulation and a firmer texture
CaSO4 (Gypsum)
delta glucono-lactone (GDL)
some acids coagulate as well
lemon
"vinegar" not sure about the taste at the end....
Depending on the coagulant used, you will obtain different qualities of tofu.
More on nigari and other coagulants here: http://en.wikipedia.org/wiki/Tofu#Salt_coagulants

Tools

- blender
- thermometer (up to 100C)
- strainer
- big pot and ladle
- thin towel boiled for cleanliness
(recommended, coarse, thin materials –not as coarse as gauze, but here is a picture of a tenugi, which is thinner than a typical kitchen cloth, or a cheese cloth may be used http://www.cheesemakingshop.co.uk/cheese-cloth.html)

Tof beans.jpg

Methods

Prepare the beans

Tof soaking.jpg

Prepare the beans by soaking overnight

Purée the soybeans

Tof puree.jpg

Purée the soybeans with the water – easier using a mixer – until smooth-ish

Boiling

Tof cooking.jpg

In a big pot, stir the puréed mix until boiling and then stir an additional 10 min (foams like cappuccino, make sure it doesn’t burn on the bottom!)

Pressing

Tof pressing.jpg

Take the mixture and press out the soymilk

Save the crushed soy (okara)

Tof okara.jpg


Nigari

Tof Nigari.jpg

Mix the Nigari with a small amount of water

Heating Soymilk

Tof soymilk.jpg

Take the soymilk, and heat while stirring until 75oC Remove the pot from the heat, and add the dissolved nigari, stir into the soymilk thoroughly and rapidly Let it rest!

Molding

After 15~20min, mix by “cutting crosses” (not stirring) into the pot The water above should clear, as the white flakes settle

Tof mold.jpg

Prepare the mold by lining with the cloth Add the above mix

Tof add mix.jpg

Press the water out (the more water you press out, the more dense the tofu)


What to do with the okara

The left-over okara contains tons of nutrients, and oil. You can make it into a veggie burger http://www.messyvegetariancook.com/tag/okara/, here using potato starch (asian market) as a binder:

Potatostarch.jpg Making patties.jpg Okaraburger.jpg

Tasting

Unmolding

Tof take out1.jpg
Tof take out2.jpg

Tof tof.jpg

Then take out of the mold and bon apetit!

Yummy

Tof taste.jpg

We all agreed that DIY tofu is the best.

Tof soya.jpg

And realy tasty when adding some soy sauce.

Enjoy!